What to know before a substantial renovation of your NYC prewar apartment
- The project scope depends on the apartment's condition as well as the desired layout
- A whole-home renovation can involve a cosmetic, full, or selective gut renovation
- Building rules, especially ‘wet-over-dry’ restrictions, can limit the possible updates
This updated living area, showcasing a fireplace clad in Explosion Blue Quartzite, was part of an eight-month renovation of a prewar co-op at 69 West 9th St. in Greenwich Village by design-build firm Gallery KBNY.
Gallery KBNY
For many people, prewar apartments offer the quintessential New York City lifestyle: high ceilings, original moldings, and well-defined rooms in a traditional layout. But updating a prewar is often more complicated than renovating a post-war unit because of aging electrical and plumbing systems, plaster walls that are harder to open and patch than drywall, and limited options for adding HVAC. Most prewar buildings are co-ops, which tend to impose stricter renovation rules than condos.
Counterintuitively, a gut renovation can be more predictable than a partial one. "Blending new work with existing conditions means matching materials, proportions, finishes, and infrastructure that were never designed to fit together," said Alex Ushyarov, director of business development at Gallery KBNY, a Manhattan-based, full-service design-build firm.
While no one can see everything behind the walls before they come down, Ushyarov explained, adequate due diligence such as probing and working with an experienced team can mitigate the risk of this unknown substantially.
"Settling the big decisions early, from layout to mechanical systems, can head off costly mistakes later," he said.
Here's what prewar owners should know before getting started.
Determine the scope of the renovation
A whole-home renovation encompasses every room, but it doesn’t necessarily mean gutting the entire apartment. The right approach depends on the condition of the existing infrastructure, the desired layout, and the extent of the planned updates.
A cosmetic renovation is limited to finishes, flooring, lighting, millwork, and kitchen and bath surfaces. This may be sufficient when the layout and infrastructure are sound.
A selective gut renovation is often appropriate when kitchens and bathrooms need new plumbing or reconfiguration, but systems elsewhere remain in good condition.
A full gut renovation, which takes the walls down to the studs, may be warranted when major layout changes, aging electrical or plumbing systems, new HVAC, soundproofing, or apartment combinations require access to walls and ceilings.
Two recent whole-home projects by Gallery KBNY show a gut isn't always the answer. At 61 West 9th St. in Greenwich Village, what began as a desire to refresh the kitchen and flooring of a 1,100-square-foot prewar co-op evolved into a partial renovation that encompassed custom millwork, an electrical upgrade, fireplace updates, new light fixtures, and an HVAC system.
At 1035 Fifth Ave., a 4,000-square-foot apartment in an Italian Renaissance palazzo-style co-op on the Upper East Side hadn’t been updated in more than 50 years. But its original architectural details and marble ruled out a full gut, so the 10-month renovation updated every room while working around them. The layout also allowed them to add a full bath and a powder room.


The building's alteration agreement, which governs renovations in co-ops and condos, can also expand the scope, including by requiring you to update plumbing and electrical systems, add soundproofing, or take other measures, all at the owner’s expense. Some changes, like removing a load-bearing wall, may be ruled out entirely.
Start with the structure, not the floor plan
It’s tempting to dive into the fun parts, like whether to get a waterfall kitchen island or add a soaking tub to the primary bath. But design decisions made before you understand the infrastructure often have to be undone later.
A walkthrough with small exploratory openings in walls and ceilings can reveal the condition of the electrical, plumbing, HVAC, and structure before plans are drawn, and help you plan for what demolition may uncover, from deteriorated wiring to asbestos or lead paint.
"These systems can’t be evaluated one at a time," Ushyarov said. "They compete for the same wall and ceiling space, and changing one affects the others: central air adds electrical load, and moving a kitchen changes both plumbing and power needs."

Consider underlying system upgrades
Electrical capacity is often the first constraint. Many older units were wired for 40 to 60 amps, while a modern kitchen and central air typically need 100 to 200, and whether an upgrade is possible depends on whether the building’s electrical infrastructure can deliver that much power.
At 1035 Fifth Ave., Gallery KBNY rewired 60 percent of the apartment through strategic openings, leaving its prewar details intact.
The location of the plumbing lines determines how much the layout can change, and original pipes are often past their useful life. Many co-ops also have "wet-over-dry" rules that bar kitchens or baths above a neighbor's living spaces.
Adding central air raises other concerns, since ductwork usually requires lowering ceilings, though running it through closets and hallways can preserve ceiling height in living areas. Ductless mini-splits are another option, though they still need an outdoor condenser, and many buildings also restrict where those can go.
To preserve the ceiling heights and Central Park views at 1035 Fifth Ave., the team installed a split-system condenser in a back laundry room converted into an indoor-outdoor space. An automatic louver that replaced a window opens as the system cycles on for fresh air, while a drainage system and heat-traced pipes protect against water and freezing.
"Planning these systems along with the layout, rather than fitting them in afterward, avoids costly changes and construction delays," Ushyarov said.
Understand approvals before setting your timeline
As mentioned, the alteration agreement sets the terms for the job: required plans and engineering drawings, insurance minimums, permitted work hours, and a refundable deposit, often $5,000 or 10 to 15 percent of the project cost. Daily fines for running late are common, and some buildings allow renovations only in summer.
Board approval can take many months for gut renovations. That’s before DOB permits and, in historic districts and landmarked buildings like both of the projects shown here, Landmarks Preservation Commission review.
Gallery KBNY's approach is to be proactive rather than reactive, according to Ushyarov. The team starts by reviewing the alteration agreement, then conducts preliminary due diligence: testing for asbestos, assessing electrical load, and probing walls for potential layout changes. It also researches previous renovations in the building to understand what has been permitted.
"From there, we meet with the resident manager to fill in any gaps and identify the building's reviewing engineer or architect," Ushyarov said. “Having worked with many of these professionals throughout Manhattan, we often already know their expectations, the questions they’re likely to raise, and how to address them before they become issues."
Only after this groundwork is complete does the team submit a comprehensive alteration package. “The goal is to eliminate ambiguity, anticipate objections, and avoid the endless back-and-forth,” Ushyarov said.
Preserve the architecture while updating the design
Prewar character is often why people buy these apartments, so it's important to consider which original features to restore, preserve, or replace.
Those choices depend on existing conditions, renovation scope, budget, and building requirements. Original hardwood floors, moldings, trim, and fireplaces are often worth saving, but each decision has to fit the overall renovation. Moving walls, for example, exposes areas of flooring that must be patched and matched to the original, and some buildings require fireproofing beneath the subfloor, which effectively means replacing the floors altogether.
"When these elements are in good enough condition to be properly restored, we strongly encourage preserving them. They’re a big part of what gives prewar apartments their character,” Ushyarov said. But when a century of paint layers, patchwork and deterioration makes restoration impractical, recreating the original period details can be the better solution. “You retain the architectural character and historical aesthetic, but with new materials and a cleaner, more consistent finish,” he said.
That balance shaped the design brief for both projects. The goal at 61 West 9th St. was to modernize the apartment while honoring its bones: the existing dining room sconces stayed, and custom millwork restored symmetry around an off-center living room window.

At 1035 Fifth Ave., the team stitched new wood into the original parquet floors, polished the marble throughout, and restored the marble fireplace. To match the foundational pre-war details, the transitional design plan called for custom millwork that accentuated the original moldings throughout the space, notably the library (shown below) and a kid's bedroom that features a floor-to-ceiling white oak bunk bed.

Making these decisions during planning matters. “Going back to update or add details after the trades have already left isn’t just inefficient or costly," Ushyarov said. It also creates unnecessary disruption for clients who have already spent the better part of a year displaced from their homes. “Our philosophy is simple: if you’re going to do something, do it right the first time."
Choose the right renovation team
A whole-home prewar renovation involves designers, engineers, building management and a long list of trades, and a decision by any one of them affects the others. When separate firms handle the design and the construction, it isn’t always clear who is responsible when something goes wrong.
With an integrated design-build team, everyone works toward the same outcome from day one: the people designing the space understand how it will be built, the people building it understand the design intent, and the team responsible for approvals is involved throughout.
"One of the biggest advantages of having a single team responsible for design, approvals, and construction is that accountability doesn’t get divided along with the responsibilities," Ushyarov said. "There is no finger-pointing, no competing interests, and no ambiguity about who owns the outcome."
One client told him the best part of working with Gallery KBNY was having only one firm to call if something went wrong—and never needing to make that call.
If a whole-home apartment renovation is on your horizon, an early conversation can help clarify what's possible. Gallery KBNY welcomes inquiries from homeowners planning projects throughout New York City. Reach the team at [email protected] or 718-690-3840.
