New Construction + Condos

The 7 most common construction defects: A condo buyers guide

image
By Marjorie Cohen  |
April 21, 2022 - 12:30PM
image

If you’re thinking that your homeowner’s insurance policy will cover any issues that may come up with your new condo, think again.  

iStock

Have you fallen in love with new construction? Are you a fan of modern buildings that have apartments with glass facades, polished surfaces, and eco-friendly features? 

The clean, uncluttered look of a new condo can be very enticing, but if you're thinking of buying in a new (or nearly new) building you need to tread carefully. New does not mean trouble-free. Those windows, floors, and green add ons may be exactly what will cause big (and hugely expensive) problems once you and the other owners in your building have settled in. Many of the problems with new construction can be traced back to issues of time and money—and using inferior products or taking shortcuts during the building process. 

That appears to be especially true right now. Complaints of poor construction are rising in both new luxury condo and rental buildings, The New York Times reports. During the pandemic, builders faced a broader set of headaches: work interruptions, supply chain issues, and pressure from lenders. As a result, some New Yorkers who recently moved into new buildings are encountering closed or unfinished amenity spaces and common areas, plus heating problems, poor sound insulation, faulty elevators and leaks—lots of leaks, apparently, according to the article.

Robert Braverman, a real estate attorney at Manhattan-based Braverman Greenspun, is seeing a “steady flow of cases” connected to recent construction. He says he is currently representing 25 new buildings with construction defect claims, up from his usual 10 to 15.


[Editor’s note: An earlier version of this post was published in May 2019 and has been updated with new information for April 2022.]


Those lawsuits are an important warning for potential buyers. That's because the best way to avoid buying in a building with construction problems is to do some preemptive research and find out whether the developer has any pending litigation for construction defects.  

“This would be a red flag for any buyer for a number of reasons,” Braverman says. “If your building winds up with substantial defects that the developer won’t fix, you could face assessments for both the repairs and a six-figure lawsuit against the developer.” 

Your property values can also take a hit when a building is engaged in protracted litigation, Braverman says, and a lawsuit can create substantial financing difficulties for owners wanting to sell. 

The result of cutting corners

Jamey Ehrman, a senior engineer at RAND Engineering & Architecture, says that sometimes when developers run into financial problems, they may feel the need to rush and cut corners.

“Our forensics team has a steady work flow reviewing buildings, looking for systematic defects and issues, helping condo or co-op boards to understand their options for repair or restitution,” he says.

If you’re thinking that your homeowner’s insurance policy will cover any issues that may come up, think again.  

“Insurance policies do not cover faulty workmanship/construction,” says Jeff Schneider, president of Gotham Brokerage (a Brick sponsor). A fire or broken pipe caused by poor workmanship may be covered, he says. “But if you are aware of a condition that needs to be remediated and don't take action until there is an incident, you might lose your coverage,” 

The news isn’t completely bleak. Jon Colatrella, executive director of Howard L. Zimmerman Architects, is optimistic about the state of new construction in NYC today. He says the Department of Buildings has put a bigger focus on inspections by third-party agencies. “While this has not solved all of the new construction defects, it has certainly reduced the amount of latent defects,” he says.

Larger developers are also making greater use of “third-party architects and engineers to perform peer reviews of the construction drawings” as a building progresses,” he says. It’s an improvement over the last construction boom “when developers relied solely on the general contractor for quality control oversight," a situation that he compares to a “fox guarding the hen house.”

To avoid buying into a building with problems, check out this list of things to look out for with new and nearly new construction. 

1) Leaks in the facade and windows

More daring building design means a greater change of window and facade problems, Braverman says.

"Many of the construction defect cases I handle involve complex curtain wall systems that, while aesthetically pleasing with their sleek look and over-sized windows, are comprised of thousands of components," he says. "All you need is for a few of these pieces to fail because the piece itself is defective or improperly installed, and you could have a serious water infiltration issue, which is often difficult to identify and repair.” 

If you’re moving into a brand new building, the last thing on your mind might be taking care of your new windows. But they need regular maintenance in order to work properly.

“The seals and gaskets need to be cleaned at least once a year, otherwise they will develop drafts and leaks,” according to Ehrman. “All window seals should be thoroughly vacuumed post-construction to remove any debris that might have settled there.”

He says many residents jump to the conclusion that their windows are faulty. Sometimes they’re right, but not always: “Some window systems are better than others; all are designed to allow a finite amount of air transfer.”

2) Wood floor problems

Colatrella says that problems with wood flooring are typically due to inferior materials and/or not letting the material acclimate to the building before installation.

That’s because natural wood expands and contracts over time. If it’s put down when damp, gaps can develop. 

Small gaps the thickness of a dime are not a concern, but gaps as thick as a quarter may be. Engineered wooden floors—flooring with wood veneer over composite—may be subject to warping from moisture or, in a worst case scenario, mold.

Often facade leaks are what make floors warp and you’ll see the results of the leak on the floor before you’ll see it on the ceiling or walls.

3) Lack of fire prevention features

Colatrella says that this is “still one of the biggest defects that we see is related to fire stopping and fire separation, despite the increase in layers of inspection.”

That means buildings might have inadequate fire-stopping seals around pipes and conduits, Ehrman says. “In addition to posing a safety risk, such deficiencies contribute to odor transfer between apartments.”

4) Ventilation/exhaust problems

This is often an issue in both the public areas of a building and in individual apartments. In common areas, a proper ventilation system may not exist at all or may not function properly. Anemometers are used to measure air flow in these areas.

New high-rise buildings present a particular problem for ventilation/exhaust systems, called the “stack effect.” These buildings are sealed off from the outdoors and when their heating systems are in use, hot air rises through the hallways and creates negative pressure, in some cases pulling odors from one apartment to another, usually on the lower floors. 

In extreme cases, the operation of the sliding elevator doors can be adversely affected, even stopping them from working altogether. 

5) Inferior substitutions

Standard offering plans include a disclaimer that allows the developer to make changes that are of equal or better quality. Whether something is equal or better can be subjective and surveying engineers often find things aren’t quite as they were intended in the original plans for the building. Most substitutions are made simply because they are cheaper. 

6) Useless warranties

Warranties are sometimes so specific that they’re useless.

Colaterella described a warranty that only covered rolls of roofing material when they are dropped off at the building and does not cover removal or re-installation.

To protect against that kind of unpleasant surprise, Braverman advises prospective purchasers (or their lawyers) to get as much information as possible about the warranties that will be issued for the building’s structure and systems—which isn’t always available in the offering plan.

“If possible, find out if the developer has used these systems in other projects and with what degree of success,” he says.

7) Problems with green technologies

Apparently, it’s not easy being green. Some green technologies that were meant to save energy and operating costs have not lived up to their promises by manufacturers, Colatrella says.

“More importantly, they have not been as reliable in everyday operation and have had more breakdowns than advertised which impacts cost savings a lot,” he says. 

 

image

Marjorie Cohen

Contributing writer

Marjorie Cohen is a New York City-based freelance journalist, editor and author of over seven non-fiction books. Her real estate reporting has appeared in amNewYork, Investopedia, and The West Side Rag. Since moving to New York five decades ago for graduate school at the Teachers College of Columbia University, Marjorie has lived on the Upper West Side, with a brief detour to West 15th Street when she got six months free rent in a new building.

Brick Underground articles occasionally include the expertise of, or information about, advertising partners when relevant to the story. We will never promote an advertiser's product without making the relationship clear to our readers.

topics: